Model/Brand/Package
Category/Description
Inventory
Price
Data
-
Category: D-Subrear caseDescription: HARTING 09 67 037 0424 Connector back shell, D Sub, DC, 180 °, thermoplastic body93711+$39.557310+$37.2876100+$35.6016250+$35.3422500+$35.08281000+$34.79102500+$34.53165000+$34.3694
-
Category: D-Subrear caseDescription: D SUB MA 5W5_WO ACCESSORY_ NON M83891+$106.559010+$101.9260100+$101.0921250+$100.4434500+$99.42421000+$98.96092500+$98.31235000+$97.7563
-
Category: D-Subrear caseDescription: Harting A series of top and side access springs or sliding locks for D-Sub connector covers or bottom shells are made of thermoplastic or metalized thermoplastic materials. Part number 0967xxx0511 is a gray thermoplastic bottom shell with side cable access Part number 0967xxx0411 is a gray thermoplastic bottom shell with top cable access Part number 0967xxx0453 is a metalized thermoplastic bottom shell with top and side cable access Model 9 → 37 contacts can be installed side by side at a spacing of 15.24 mm (3E) - # # # unshielded shield74895+$29.324950+$28.0717200+$27.3699500+$27.19441000+$27.01902500+$26.81855000+$26.69327500+$26.5678
-
Category: D-Subrear caseDescription: D-SubRear shell DSUB METAL-HOOD 50P SIDCE91131+$69.986710+$66.9438100+$66.3961250+$65.9701500+$65.30061000+$64.99632500+$64.57035000+$64.2052
-
Category: D-Subrear caseDescription: Connector back shell, D Sub, DD, 180 °, metal body58141+$65.829510+$62.9673100+$62.4521250+$62.0514500+$61.42171000+$61.13552500+$60.73485000+$60.3914
-
Category: D-Subrear caseDescription: D-SubRear shell D-SUB 50 INDUCOM FULL MET HOOD78821+$187.726010+$182.828850+$179.0743100+$177.7684200+$176.7889500+$175.48301000+$174.66682000+$173.8506
-
Category: D-Subrear caseDescription: Full metal hood 9P S40° ent. K scr 4-4022061+$79.113110+$75.6734100+$75.0543250+$74.5727500+$73.81601000+$73.47202500+$72.99045000+$72.5777
-
Category: D-Subrear caseDescription: HARTING 09670250453 Connector back cover, D-Sub 25 way48171+$88.798410+$84.9376100+$84.2427250+$83.7021500+$82.85281000+$82.46672500+$81.92625000+$81.4629
-
Category: D-Subrear caseDescription: 1 Top access (9, 15 contacts)/1 top+2 side access (25, 37, and 50 contacts) crimping flange or screw clamp IP 40 # # # D-SUB shielding shield7137
-
Category: D-Subrear caseDescription: Harting 热塑性顶部和侧面接入 D-Sub 连接器护罩、弹簧或滑动锁定 一系列顶部和侧面接入弹簧或滑动锁定 D-Sub 连接器护罩或底壳由热塑性或金属化热塑性制成。 部件号 0967xxx0511 是灰色热塑性底壳,带侧面电缆接入 部件号 0967xxx0411 是灰色热塑性底壳,带顶部电缆接入 部件号 0967xxx0453 是金属化热塑性底壳,带顶部和侧面电缆接入 型号 9 → 37 触点可并排、以 15.24 mm (3E) 的间距安装 --- ### 无屏蔽护罩4763
-
Category: D-Subrear caseDescription: Harting 全金属顶部和侧面接入 D-Sub 连接器护罩,带短螺钉 一系列顶部和侧面接入 D-Sub 连接器护罩或底壳由金属制成,带短螺钉紧固件。 部件号 0967xxx0334 是底壳,带侧面电缆接入和 4-40 UNC 锁定螺钉 部件号 0967xxx0335 是底壳,带侧面电缆接入和 M3 锁定螺钉 部件号 0967xxx0344 是底壳,带顶部电缆接入和 4-40 UNC 锁定螺钉 部件号 0967xxx0349 是底壳,带顶部电缆接入和 M3 锁定螺钉 ### D-SUB 屏蔽护罩6420
-
Category: D-Subrear caseDescription: Harting 全金属顶部和侧面接入 D-Sub 连接器护罩,带滚花螺钉 一系列顶部和侧面接入 D-Sub 连接器护罩或底壳由金属制成,带滚花螺钉紧固件。 这些 d-sub 连接器底壳随附垫圈套件部分。 部件号 0967xxx0343 是底壳,带顶部电缆接入和 4-40 UNC 滚花螺钉 部件号 0967xxx0348 是底壳,带顶部电缆接入和 M3 滚花螺钉 部件号 0967xxx0333 是底壳,带侧面电缆接入和 4-40 UNC 滚花螺钉 部件号 0967xxx0336 是底壳,带侧面电缆接入和 M3 滚花螺钉 库存号 873-9857 是备用 M3 滚花螺钉 带短型螺钉 4-40 UNC 带金属电缆夹、螺钉和橡胶衬套 ### 标准 IEC 60 807 ### D-SUB 屏蔽护罩2279
-
Category: D-Subrear caseDescription: Harting 全金属顶部和侧面接入 D-Sub 连接器护罩,带短螺钉 一系列顶部和侧面接入 D-Sub 连接器护罩或底壳由金属制成,带短螺钉紧固件。 部件号 0967xxx0334 是底壳,带侧面电缆接入和 4-40 UNC 锁定螺钉 部件号 0967xxx0335 是底壳,带侧面电缆接入和 M3 锁定螺钉 部件号 0967xxx0344 是底壳,带顶部电缆接入和 4-40 UNC 锁定螺钉 部件号 0967xxx0349 是底壳,带顶部电缆接入和 M3 锁定螺钉 ### D-SUB 屏蔽护罩1306
-
Category: D-Subrear caseDescription: 692-7374 / 692-7383) ### Harting D Sub 高密度 高密度系列超过标准 D Sub 连接器触点的容量 70%。 压印引脚 镀锡金外壳(公连接器,有凹痕)9016
-
Category: D-Subrear caseDescription: 顶部和侧面接入护罩 带一个长滚花螺钉 4-40 UNC 金属电缆夹 螺钉和交错垫圈 提供镀金属热塑性或热塑性 ### 标准 IEC 60 807 ### D-SUB 屏蔽护罩8462
-
Category: D-Subrear caseDescription: Harting D Sub 顶部接入护罩,黑色热塑且金属化 Harting D Sub 护罩,采用金属化或黑色热塑顶部和侧面接入或仅采用顶部接入,附有滚花螺钉和内部电缆夹,可在许多应用中确保安全可靠的 D-Sub 接口连接。 带滚花锁定螺钉 4-40 UNC 带金属电缆夹和螺钉 ### 标准 IEC 60 807 ### D-SUB 屏蔽护罩8095
